ON
OFF
Charging
Pairing
Reset
*
The receiver automa�cally switches on when
connected to your device.
The receiver automa�cally switches off when
disconnected from your device.
The receiver takes the necessary power from your
connected device.
Pairing starts automa�cally when you plug in the
receiver and turn on the transmi�er.
To reset the device, press the reset bu�on once
long (3s). To cancel pairing, press the reset bu�on
with two quick presses (2x/1s).
The indicator light will turn green and a�er a moment it will flash green looking for the transmi�er to pair.
The light does not illuminate when switched off.
----
The indicator light flashes green while pairing or searching for a transmi�er to pair. A�er pairing with a transmi�er, the
light stays green for the en�re connec�on.
----
Wireless microphone VIKING M301 / Jack 3.5mm - user manual
Thank you for choosing a VIKING product.
The VIKING M301/Jack 3.5mm is a smart wireless microphone that provides professional recording output. No addi�onal applica�on installa�on is required and you can use it
for most devices that support audio recording. It can be used in many ways: online live streaming, Vlog video recording, program interview, recording, instruc�onal videos and
more.
The wireless microphone consists of three parts (See Figure 1 and 2 and 3), one is the housing, the other is the microphone transmi�er and the third is the Jack 3.5mm receiver.
Step 1: Connect the receiver to your device. The connec�on is successful if the LED on the receiver flashes green.
Step 2: Remove the transmi�er from the housing. The LED on the transmi�er will flash green.
Step 3: Once the transmi�er is paired with the receiver, the LEDs stop flashing and glow a steady green light. At this point, you can record audio using any app or program on your
device.
* When rese�ng, a restart must be performed on both devices (receiver and transmi�er)
NOTE: If the receiver is connected to your device, no audio recording (recordings made with the microphone, audio recording) files of all formats, YouTube, Spo�fy, etc.) and
phone calls cannot be played. To play audio recordings or make telephone calls disconnect the receiver from your device.
Warning:
1. Do not disassemble the device and its accessories.
2. Do not modify, disassemble, open, puncture, or otherwise tamper with the device.
3. Protect from fire and prolonged direct sunlight to prevent overhea�ng and damage.
4. Avoid any contact of the device with water!
6. Do not use the device in a dusty environment.
5. This appliance is not intended for use by persons (including children) with physical, sensory or mental disabili�es or lack of experience and
knowledge prevents the safe use of the device.
7. Do not use chemical cleaners, etc.
Stop using this device immediately if the device is damaged in any way. Keep out of reach of children! Small parts of the device can be
inhaled or swallowed by children.
This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired opera�on of the device.
Do not dispose of the product at the end of its useful life as unsorted municipal waste, use separate waste
collec�on points. By ensuring this product is disposed of correctly, you will help prevent poten�al nega�ve
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials will help to conserve natural resources. For more
detailed informa�on about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
fig.2: Transmiter
fig.3: Receiver
fig.1: Case
The VIKING brand is distributed by the company: BONA SPES s.r.o.
Řepčín 250, Olomouc 77900, IČO: 03476774, DIČ: CZ03476774,
tel: +420 777 109 009, www.best-power.cz,
email: [email protected]
MADE IN CHINA
product informa�on
BONA SPES s.r.o.
EN
Descrip�on:
Case (fig.1)
1. LED indicator
2. USB-C charging input
Transmi�er (fig.2)
3. LED indicator
4. Reset bu�on
5. Clip for a�achment
6. Metal contact
Receiver (fig.3)
7. Jack 3.5mm input for connec�ng your device
8. LED indicator
9. Reset bu�on
3. Wind protector
4. Instruc�ons for use (EN)
Package contents:
1. Housing (transmi�er,
receiver)
2. USB-C charging cable
Charging the case
Charging one
mic.
Ba�ery status
indica�on
The LED flashes red when charging. When the case is fully charged, the LED goes off.
If the case is charging the junc�on box, the LED indicator flashes green. If the microphone is charged, the LED
goes off
Green: 100-75%
Blue: 74-36%
Red: 35-0%
The transmi�er automa�cally switches on when the
case is opened.
The transmi�er will automa�cally turn off when
inserted into the case and the case is closed, or if no
receiver is paired for ten minutes.
Insert the transmi�er into the housing. Charging will
turn on automa�cally.
Pairing starts automa�cally when removed from the
case.
Ba�ery level is below 20%.
Press the reset bu�on once long (3s) to reset the
device. To cancel pairing, press the reset bu�on with
two quick presses (2x/1s)
ON
OFF
Charging
Pairing
Ba�ery capacity alarm
Reset*
The indicator light will turn green and a�er a while it will flash green and search for a receiver to pair.
The light does not illuminate when switched off.
When charging, the light does not illuminate.
The indicator light flashes green while pairing or searching for a pairing receiver. A�er pairing with a receiver,
the light stays green throughout the connec�on.
The LED flashes blue.
When rese�ng, the LED starts flashing green. The transmi�er then reconnects to the receiver and the LED
turns green.
Transmitter control
Receiver control
Controlling the case
