7
(B)
Figure 17
3. Place the oven and the carton portions together on
the top of the range. See Fig. 17. Slide carton toward
backguard until it stops. Align the lower back edge
of the oven with the mounting plate.
4. Thread the power supply cord through the hole made
in the bottom of the top cabinet.
5. Hang the oven on the lower edge of the mounting
plate. See Fig. 18. Take care that the power cord
is able to clear the edge of the hole as the oven
is rotated upward. (In the case of a non-recessed
C
D
Figure 18
Figure 19
Figure 20
Figure 21
Mounting Screws
8 OVEN INSTALLATION
bottom in the top cabinet, the hole for the cord may
need to be enlarged.) Remove the carton portions.
6. Tighten the two unit mounting screws located in the
grease filter openings. See Fig. 19.
7. Install grease filters by fitting into the opening. Push
back and up into place. See Fig. 20.
8. Use the two Top Cabinet Screws (C) and two
Flat Washers (D), supplied in the INSTALLATION
HARDWARE, to attach the unit to the top cabinet.
See Fig. 21.
