Installation
IMPORTANT:
Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
Step 1
When using the power terminals, make sure your product is listed in
Diagram 1
. If your product is not
listed please see section
B
below and wire using the included power supply.
Step 2
Disconnect power from the doorbox or phone.
Step 3
Remove the doorbox or phone from the surface mount box.
Step 4
Connect the two wires from the
VE-LIGHT
to the power input terminals of the doorbox (see
Diagram
2
).
Note:
Wires can be connected in either polarity.
Step 5
Place the
VE-LIGHT
bracket against the upper mounting lip of the surface mount box and route wires
through the provided slot (see
Diagram 2
).
Step 6
Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in
the slot (see
Diagram 5
).
B. Using the Included Power Supply (see Diagram 3)
A. Using the Power Input Terminals of a Viking Doorbox
Diagram 1
Viking Model
DOD#
K-1200/EWP
182
K-1205/EWP
183
W-1000/EWP
170
W-3000/EWP
180
W-3005/EWP
181
Viking Model
DOD#
E-10A/EWP
210
E-30/EWP
212
E-30-PT/EWP
214
E-35/EWP
178
E-1600-20A/EWP
215
E-1600-30A/EWP
215
E-1600A-BLT-EWP
217
E-1600A-BLT2-EWP
217
K-1500-7
352
K-1700-3/EWP
157
K-1705-3/EWP
159
K-1900-7/EWP
364
K-1900-8/EWP
362
Diagram 3
Step 1
Disconnect power from the doorbox or phone.
Step 2
Remove the doorbox or phone from the surface mount box.
Step 3
Connect the two wires from the
VE-LIGHT
to the included power supply using the included butt con-
nectors (see
Diagram 4
).
Note:
Wires can be connected in either polarity.
Step 4
Place the
VE-LIGHT
bracket against the upper mounting lip of the surface mount box and route wires
through the provided slot (see
Diagram 4
).
Step 5
Carefully place the phone or doorbox back into the surface mount box, making sure the wires stay in
the slot (see
Diagram 5
).
Rear View of Viking Doorbox
(not included)
Not polarity
sensitive
Front View of the VE-LIGHT
IMPORTANT:
Wires MUST be
routed through
the provided slot.
Diagram 2
Front View of the VE-LIGHT
IMPORTANT:
Wires MUST be
routed through
the provided slot.
* (2) Gel-Filled
Butt Connectors
(included)
Not polarity
sensitive
120V AC
12V DC
Adapter
(included)
Negative
Positive
Diagram 4
* Note:
The gel-filled (water-tight) butt connectors are designed for insu-
lation displacement on 19-26 gauge wire with a maximum insulation of
0.082 inches. Do not strip wires prior to terminating.
2