51
7
8
Adjust and reposition bezel
as necessary. Tighten all screws securely.
Replace spill tray in lower part of bezel.
9
Align cube switch with sliding lever and firmly push
until sliding lever is flush with bezel.
52
For a left hinge door, cut 5/8” x 7/8” in lower left corner.
Note:
Steps show panel upside down and notched for left
hinge application. Mirror dimensions for right hinge door.
For a left hinge door, cut 5/8” x 2 3/4” in lower left corner.
Note:
Steps show panel upside down and notched for left
hinge application. Mirror dimensions for right hinge door.
Measure and cut 2 1/16” diagonal in lower
left corner.
Cut out diagonal in lower left corner.
7/8”
(2.2c
m)
5/8”
(1.6
cm)
3
2
1
1a
For Models made
before 9/22/06
3”
(7.62
cm)
5/8”
(1.6
cm)
3
2
1
1b
For Models made
after 9/22/06
1-1
3/1
6”
(4.6
0 cm
)
2b
For Models made after 9/22/06
3/
32
”
(.2
4 c
m)
5/8”
(1.6
cm)
3
3
2
1
Bottom Mount Custom Panel Hinge Cutout (if required)
Measure and cut 1/8” x 2” diagonal in lower
left corner.
2”
(5.1
cm
)
1/
8”
(0.
3 c
m)
2a
For Models made before 9/22/06
Final view of lower corner.
4
1/4” (0.6 cm)
base panel added
Surfaces
are flush
