background image

9

Adjusting Controls

The Fresh Food Temp control adjusts the refrigerator compartment
temperature. The Freezer Temp control adjusts the freezer
compartment temperature.

If you need to adjust the temperature in either the refrigerator or
freezer compartment, use the settings listed in the chart as a guide.

To Adjust Set Point Temperatures:

The display will show the set point for approximately three seconds.

• Press the touch pad next to “WARMER” or “COLDER” to adjust the

set point to the desired temperature. Then, press the touch pad next
to “DONE” to lock in the new set point temperature.

Note

: Except when first turning on the refrigerator, DO NOT adjust

either temperature control more than one setting at a time. Wait 24
hours for the temperature to stabilize between adjustments.

Temperature Adjustment Chart

Adjusting Controls

P

ro

d

u

ct

C

o

n

tr

o

ls

8

For your convenience, your temperature controls are preset at the
factory. When you first install your refrigerator, make sure the controls
are still set to the recommended set points.

• Press the touch pad next to “FRESH FOOD TEMP” on the main

menu to display the current set point of the compartment. Press the
touch pad next to “WARMER” or “COLDER” to adjust the set point
to the recommended 38°F. Press the touch pad next to “DONE” to
lock in the setting.

• Press the touch pad next to “FREEZER TEMP” on the main menu to

display the current set point of the compartment. Press the touch
pad next to “WARMER” or “COLDER” to adjust the set point to the
recommended 0°F. Press the touch pad next to “DONE” to lock in
the setting.

To Turn Cooling Off/On:

Cooling Off controls all cooling functions, the control panel and the
dispenser. It does not disconnect power to the refrigerator.

• Press and hold the “COOLING OFF” touch pad for three seconds.

The LED will light up to indicate that cooling is OFF. Neither
compartment will cool.

• Press the “COOLING OFF” touch pad again to turn “ON” the

cooling. The LED will turn off.

Temperature Controls

P

ro

d

u

ct

C

o

n

tr

o

ls

Condition/Reason

Adjustment

Refrigerator too warm

Fresh Food Control
1° lower

Freezer too warm/too little ice

Freezer Control
1° lower

Refrigerator too cold

Fresh Food Control
1° higher

Freezer too cold

Freezer Control
1° higher

Содержание Designer DDFF136DSS



















Отзывы: