Viking DERT361-5B Series, Руководство пользователя

Страница: 111 / 175

107
PROFESSIONAL & DESIGNER HOOD DATA
MODEL NUMBER
MAX DUCT RUN 120 V/60 HZ
MAX AMPS
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
50 FEET (15.2M)
75 FEET (22.9M)
75 FEET (22.9M)
40 FEET (12.2M)
50 FEET (15.2M)
50 FEET (15.2M)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.0
5.7
3.0
CFM RECOMMENDED DUCT
SIZE
300
300
440
600
600
880
900
900
1200
1200
1200
1200
1500
1500
500
900
1200
7" ROUND
7" ROUND
7" ROUND
7" ROUND
7" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
10" ROUND
3
/
4
X10" CAN
TRANSITION TO 6" ROUND
10" ROUND
10" ROUND
FOR USE WITH HOODS
DIV300
(INTERIOR)
VIV300 (INTERIOR)
DIV440 (INTERIOR)
DIV600 (INTERIOR)
VIV600 (INTERIOR)
DIV880 (INTERIOR)
DEV900 (EXTERIOR)
VEV900 (EXTERIOR)
DIV1200 (INTERIOR)
VIV1200 (INTERIOR)
DEV1200 (EXTERIOR)
VEV1200 (EXTERIOR)
DEV1500 (EXTERIOR)
VEV1500 (EXTERIOR)
FOR USE WITH DOWNDRAFTS
VIDV500
(INTERIOR)
VEDV900 (EXTERIOR)
VEDV1200 (EXTERIOR)
PROPER INSTALLATION/DUCTING IS EXTREMELY IMPORTANT TO ENSURE MAXIMUM PERFORMANCE FROM ANY
VENTILATION PRODUCT
• ALL CFMS STATED BASED ON TESTS WITH .1 STATIC PRESSURE: WITHOUT APPLYING STATIC PRESSURE (SOME
BRANDS CONSCIOUSLY DO NOT), CFM COULD BE GREATLY OVERSTATED.
• DUCT RUN LENGTH IS FOR GENERAL REFERENCE ONLY; FOR LONGER DUCT RUNS, INCREASE DUCT SIZE AND
CONTACT A QUALIFIED AND TRAINED INSTALLER.
• STRAIGHT RUNS AND GRADUAL TURNS ARE BEST; FOR EXAMPLE, EACH 90
0
ELBOW IS EQUIVALENT TO 5-10 FEET
(1.52-3.05CM) OF STRAIGHT RUN.
• NEVER USE FLEXIBLE DUCT; IT CREATES BACK PRESSURE/AIR TURBULENCE AND GREATLY REDUCES PERFORM-
ANCE.
• PROPER PERFORMANCE IS DEPENDENT UPON PROPER DUCTING; MAKE SURE THAT A QUALIFIED AND TRAINED
INSTALLER IS USED.
• CHECK WITH A QUALIFIED AND TRAINED INSTALLER OR LOCAL CODES FOR MAKEUP AIR REQUIREMENTS, IF ANY.
• MAX. AMP RATING FOR HOODS INCLUDES RECOMMENDED VENTILATOR KIT RATING; ALL PRODUCTS MUST BE HARD
WIRED DIRECT WITH 2-WIRE WITH GROUND (REFER TO HOOD DATA CHART FOR MORE INFORMATION).
• A 1200 OR 1500 CFM (IF APPLICABLE) VENTILATOR KIT SHOULD BE USED WHEN INSTALLED OVER
RANGE/RANGETOPS WITH GAS CHAR-GRILL.