Performance Checklist
(cont.)
17
Electronic
Timing Center
Off/On
Indicator Light
Interior
Oven Light Control
Temperature
Control
Self-Clean
Indicator Light
Oven Function Selector
Function Keys
Electronic Timing
Center
Control
Panel Lock
Digital Input Keys
Digital Display
Interior
Oven Light
Control
Performance Checklist
A qualified installer should carry out the
following checks:
h
Check oven Bake Function—bake element
on full power, center and outside broil
elements at partial power. Convection
Bake function—bake and broil elements
the same with the convection fan “ON”.
h
Check TruConvec™ function—TruConvec
element (behind convection fan cover)
“ON” and convection fan “ON”.
h
Check High Broil function—both broil
elements at full power. Convection broil
function is the same with convection fan
“ON”.
h
Check Medium Broil function—inner and
outer broil elements pulse on and off.
h
Check Low Broil function—inner broil
element only.
h
Check Self-Clean function—Door will lock
in approximately 30 seconds, the center
and outside broil elements will turn “ON”
and the bake element will turn “ON” at
partial power. Check broil elements
through window to make sure they are
“ON”, then abort self-clean cycle to
unlock door.
Any adjustments necessary that are a result of
the installer not following instructions will be
the responsibility of the installer, dealer, or the
end user of the product.
16
CAUTION
DO NOT
run self-clean cycle check for
more than 10 minutes with the oven racks
and rack supports inside oven to avoid
discoloration due to the high temperature.
Designer Series
Designer Series–Touch Control
