Viking DDFB036, Руководство по установке

Страница: 13 / 22

25
5
Remove top hinge covers by removing Phillips screws.
6
7
Unscrew 5/16” hex head screws from right top hinge
and remove hinge. Retain all screws for later use.
Lift right side refrigerator door from hinge pin. Remove
door closure from hinge pin on the right side. Retain
for later use.
1
8
9
Disconnect wire harness on top of left side refrigerator
door top hinge. Release two-pin connector by pressing
junction point with a flat blade screwdriver or fingernail.
Green ground wire remains attached to the hinge.
Unscrew 5/16” hex head screws from left top hinge.
Retain all screws for later use.
24
Some installations require
door/drawer removal to transport
the refrigerator to its final location.
Make sure power cord
is disconnected from
power source.
1
Remove toe grille. Grasp firmly and pull outward to
unclip.
2
3
Open both doors 180°, or as wide as possible.
NOTE: For refrigerators in operation, shut off water before
removing water line from the door. Push in white collar and
hold. Pull the door-side tube from the connector.
Door Removal
(Side-By-Side)
WARNING
Disconnect power before removing doors.
Failure to do so can result in death or
electrical shock.
Electrical Shock Hazard
4
Close doors.
10
Lift left side refrigerator door, along with top hinge,
from hinge pin.