
IMPORTANT
5
–
Please Read and Follow
4
IMPORTANT–
Please Read and Follow!
W A R N I N G
ELECTRICAL SHOCK HAZARD
• Electrically ground dishwasher.
• Connect ground wire to green ground
connector in terminal box.
•
DO NOT
use an extension cord.
• Failure to follow these instructions, can
result in death, fire or electrical shock.
W A R N I N G
TIP OVER HAZARD
•
DO NOT
use dishwasher until
completely installed.
•
DO NOT
push down on open door.
• Doing so can result in serious injury
or cuts.
W A R N I N G
EXCESSIVE WEIGHT HAZARD
Use two or more people to move and
install dishwasher. Failure to do so can
result in back or other injury.
W A R N I N G
Disconnect the electrical power supply and
place a tag at the disconnect switch
indicating that you are working on the
circuit.
W A R N I N G
Be sure electrical power is turned off at
circuit breaker or fuse box before servicing
or installing unit.
DO NOT
use an
extension cord for this appliance.
W A R N I N G
Improper connection of the equipment –
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or serviceman if you are in
doubt as to whether the appliance is
properly grounded.
DO NOT
modify the
plug provided with the appliance; if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
W A R N I N G
Plumbing connections must comply with
applicable sanitary, safety, and plumbing
codes.
C A U T I O N
The dishwasher has a factory installed
backflow preventer.
DO NOT
add an
additional check valve.
A GFI
shall be used if required by NFPA-70
(National Electric Code), federal/state/local
laws, or local ordinances.
• The required use of a GFI is normally
related to the location of a receptacle with
respect to any significant sources of water
or moisture.
• Viking Range Corporation will NOT
warranty any problems resulting from GFI
outlets which are not installed properly or
do not meet the requirements below.
If the use of a GFI is required
, it should be:
• Of the receptacle type (breaker type or
portable type NOT recommended)
• Used with permanent wiring only
(temporary or portable wiring NOT
recommended)
• On a dedicated circuit (no other
receptacles, switches or loads in the
circuit)
• Connected to a standard breaker of
appropriate size (GFI breaker of the same
size NOT recommended)
• Rated for Class A (5 mA +/- 1 mA trip
current) as per UL 943 standard
• In good condition and free from any
loose-fitting gaskets (if applicable in
outdoor situations)
• Protected from moisture (water, steam,
high humidity) as much as reasonably
possible