background image

27

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid buildup of
odors. Wipe up spills immediately.

To Clean Your Refrigerator:
1.  Remove the top grille. See “Power On/Off Switch.”
2.  Press power switch to OFF.
3.  Remove all removable parts from inside, such as shelves, crispers,

etc.

4.  Hand wash, rinse, and dry removable parts and interior surfaces

thoroughly. Use a clean sponge or soft cloth and a mild detergent
in warm water.

Do not use abrasive or harsh cleaners such as window sprays,
scouring cleansers, flammable fluids, cleaning waxes, concentrated
detergents, bleaches or cleansers containing petroleum products
on plastic parts, interior and door liners or gaskets. Do not use
paper towels, scouring pads, or other harsh cleaning tools. These
can scratch or damage materials.

To help remove odors, you can wash interior walls with a mixture of
warm water and baking soda (2 tbs to 1 qt [26 g to 0.95 L] of
water).

5.  Clean the exterior surfaces.

To keep your stainless steel refrigerator looking like new and to
remove minor scuffs or marks, use a Stainless Steel Cleaner and
Polish.

IMPORTANT: Do not allow the Stainless Steel Cleaner and Polish
to come into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional contact does
occur, clean plastic part with a sponge and mild detergent in warm
water. Dry thoroughly with a soft cloth. To order the cleaner, see
“Accessories.”

6.   Press the power switch to ON.
7.   Replace the top grille. See “Power On/Off Switch.”

Cleaning and Maintenance

Product Care

Explosion Hazard

Use non-flammable cleaners.
Failure to do so can result in death, explosion,
or fire.

CAUTION

Содержание Built-in French Door Bottom-Freezer Refrigerator









































Отзывы: