1600A Series
1600A Series
ADA Compliant
Emergency Phones
September 10, 2015
ADA* Compliant Emergency Phones with
Built-In Digital Voice Announcer
• New Automatic Noise Canceling (ANC) feature for proper operation
in noisy environments
• Meets the latest ASME A17.1 code when used with the optional
LV-1K
Line Verification Panel, see
DOD# 246
• Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 16 seconds of voice memory
• Advanced call progress detection
• Handsfree operation
• Phone line powered
• Non-volatile memory (no batteries required)
• Marine grade 316 stainless steel prevents corrosion on stainless models
• Dials up to 5 emergency numbers
•
E-1600-20A
and
E-1600-52A
dial up to 3 non-emergency “INFO” #’s
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are
designed to meet IP66 Ingress Protection Rating, see
DOD# 859
• Hangs up on CPC, silence, busy signal, dial tone, time-out or touch
tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-15°F to 130°F)
• 9 different chassis or board only available
• Available in 42” tall tower phone model
E-1600A-BLT-EWP
(
DOD# 217
)
• Central Station Monitoring capability (dials 2 numbers)
• Optional
PB-100
Polling System available (
DOD# 232
)
• Optional
BLK-3-EWP
strobe light kit available (
DOD# 653
)
• Optional
LC-6
Six Port Concentrator available (
DOD# 245
)
• Optional
LV-1K
Line Verification Panel available (
DOD# 246
)
• Optional
E-1600A-MK-GNP
Pedestal Mounting Kit (
DOD# 227
)
• Optional
PB-1
Panic Button Kit (
DOD# 233
)
P
P
r
r
a
a
c
c
t
t
i
i
c
c
e
e
T
T
E
E
L
L
E
E
C
C
O
O
M
M
S
S
O
O
L
L
U
U
T
T
I
I
O
O
N
N
S
S
F
F
O
O
R
R
T
T
H
H
E
E
2
2
1
1
S
S
T
T
C
C
E
E
N
N
T
T
U
U
R
R
Y
Y
TECHNICAL
TECHNICAL
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
E-1600-45A
K-1600-EHFA
E-1600A
E-1600-02A
E-1600-03B
E-1600-20A
Power:
Telephone line powered. Minimum 24V DC talk battery voltage,
with a minimum loop current of 20mA loop. Loop current may be boosted
on low current lines with a Viking Model
TBB-1B
talk battery booster, see
DOD# 632
.
Dimensions:
See Installation and Specifications
Operating Temperature:
-26° C to 54° C (-15° F to 130° F)
Humidity - Standard Products:
5% to 95% non-condensing
Humidity - EWP Products:
Up to 100%
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
* Americans with Disabilities Act of 1992 contains federal reg-
ulations regarding elevator telephones (Public Law 101-336).
• Elevators
• Parking ramps/lots
• Emergency pool phones
• ATM machines
• Area of refuge locations
• Lobbies
• Entryways
• Campus emergency stations
• Roadside emergency stations
• Stadiums
• Convention centers
• Silent holdup alarm dialer using optional Panic Button Kit
A
A
p
p
p
p
l
l
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
CAUTION - When installing on an analog extension of a phone system:
Some phone systems do not conform to analog telecom standards and might
not be compatible with the 1600A Series emergency phones. For a detailed
description of the telephone line specifications required for any of the 1600A
Series phones, see
DOD# 869
.
E-1600-55A
E-1600-30A
E-1600-65A
E-1600-60A
The
1600A Series
ADA Compliant Emergency Phones are designed
to provide quick and reliable handsfree communication for any stan-
dard analog telephone line or analog phone system station port. All
1600A Series
phones meet ADA requirements for elevator/ emer-
gency telephones, and can be programmed from any Touch Tone
phone. The phones can dial up to 5 programmable emergency num-
bers, as well as 2 central station num-
bers. In addition, the
E-1600-20A
and
E-1600-52A
feature a second "
INFO
"
button that will dial up to 3 non-emer-
gency numbers.
The
1600A Series
phones can be pro-
grammed to automatically deliver a
digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered.
A “Call Connected” LED can be initiated manually or automatically. All programming parameters, including phone numbers and
location numbers, are stored in non-volatile E
2
memory. All units are phone line powered, requiring no batteries or external power
and are compatible with common Central Station Monitoring equipment.
For outdoor installations where the unit is exposed to precipitation or condensation, select
1600A Series
phones are available with
Enhanced Weather Protection (
EWP
). EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt
connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP
switches for easy on-site programming. For more information, see
DOD# 859
.
