8
9
Oven Bake Burner Conversion
Griddle Conversion
(for models equipped with a griddle)
Adjustment
Screw
Air Shutter
Screw (Front of Burner)
Screw (Rear of Burner)
-Locate bag labeled 050297-000.
-Remove griddle.
-Remove screws securing griddle burner to burner box.
-Loosen air shutter screw and adjust opening on burner to 7/16” and tighten air shutter screw.-
-Use a 1/2” deep socket wrench to remove orifi ce by turning counterclockwise.
-Install orifi ce (#57) from bag labeled 050297-000.
IMPORTANT:
The orifi ce tip must be located 3/16” inside the burner for proper gas mixture
and combustion. The depth of the orifi ce can be adjusted by turning the orifi ce
counterclockwise (more depth) or clockwise (less depth).
Reverse procedures as needed to reassemble.
36” W. Oven and 48” W. Right Hand Oven Bake Burner
Adjustment
Screw
Air Shutter
Air Shutter
Air Shutter
Set Screw
Orifice Hood
-Remove oven racks.
-Remove oven bottom.
-Remove scews securing bake burner to oven burner box.
-Loosen air shutter screw and adjust opening on burner to 3/8” (.95 cm) and tighten air shutter screw.
-Remove orifi ce by turning counter-clockwise and replace with orifi ce (#51) from bag labeled 050278-000.
IMPORTANT:
The orifi ce tip must be located 3/16” inside the burner for proper gas mixture and combustion. The
depth of the orifi ce can be adjusted by turning the orifi ce counterclockwise (more depth) or clockwise (less depth).
Reverse procedures as needed to reassemble.
48” W. Left Hand Oven Bake Burner
Adjustment
Screw
Air Shutter
-Remove oven racks.
-Remove oven bottom.
-Remove screws securing bake burner to oven burner box.
-Loosen air shutter screw and adjust opening on burner to 3/8” (.95 cm) and tighten air shutter screw.
-Remove orifi ce by turning counter-clockwise and replace with orifi ce (#57) from bag labeled 050297-000.
IMPORTANT:
The orifi ce tip must be located 3/16” inside the burner for proper gas mixture and combustion. The
depth of the orifi ce can be adjusted by turning the orifi ce counterclockwise (more depth) or clockwise (less depth).
Reverse procedures as needed to reassemble.
