Viking Range CVWH3010, Инструкция по использованию и уходу

Страница: 6 / 12

6
Pr
oduct Contr
ols/Operation
Any piece of equipment works better and lasts longer when maintained properly and kept clean. Ventilation
equipment is no exception. Your hood must be kept clean and maintained properly.
Cleaning Baffle Filters
As air passes through a baffle filter, grease particles collect on the stainless steel U-shaped baffle channels and
drip down into the bottom of the filter. Baffle filters are extremely efficient when compared to mesh filters. The
power of the hood is increased as more air passes through a baffle filter than with mesh filters, which are usually
dirty. Baffle filters are almost universally required in commercial installations due to their superior ability to
capture grease. The baffle filters should be examined periodically to assure that all surfaces and parts are clean.
The filters can be washed in a dishwasher or in a sink with hot, soapy water. Simple periodic cleaning will ensure
maximum filter effectiveness.
• Do not use caustic detergent to clean the filters. An abrasive or corrosive cleaner may damage the finish.
• Do not take the baffle filters apart to clean them. It is not necessary and will void the filter warranty.
CAUTION
Unplug power cords from control panel before
cleaning or servicing hood.
Cleaning and Maintenance
2
1
3
1
1
2
1
2
3
Slide filter forward off of rear lip. Lower filter rear,
then slide filter front out.
Slide filter forward off of rear lip. Lower filter rear,
then slide filter front out.
2
2
1
3
3
3
Slide spacer forward off of rear lip. Lower spacer
rear, then slide spacer front out.
Grease trough
(18” H. hoods only)
When cleaning filters in 18”H. hoods, always
remove the grease trough and clean by soaking
in a sink with hot soapy water.