22
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT
touch a hot oven light bulb with a damp
cloth as the bulb could break. Should the bulb break,
disconnect electric power to the appliance at the
main fuse or circuit breaker before removing bulb to
avoid electrical shock.
Replacing Oven Lights
The lights inside the oven are located in the top near the door opening.
To replace the light bulb:
1. Locate light bulb cover in top of oven cavity.
2. Unscrew glass light cover.
3. Use oven miitt during bulb removal to protect your hand in case the bulb breaks.
4. Replace the bulb with a 230 volt, 25-watt appliance bulb.
5. Replace the light cover
6. Reconnect power at the main fuse or circuit breaker.
Problem
Possible Cause and/or Remedy
Range will not function.
Range is not connected to electrical power: Have electrician
check power circuit breaker, wiring, and fuses.
Broil does not work.
Temperature control knob is rotated too far past
broil position.
Oven light will not work.
Light bulb is burned out.
Range is not connected to power.
Igniters will not work.
Circuit is tripped.
Fuse is blown.
Range is not connected to power.
Igniters sparking but no fl ame ignition.
Gas supply valve is in “OFF” position.
Gas supply is interrupted.
Igniters sparking continuously after
fl ame ignition.
Power supply is not grounded.
Power supply polarity is reversed.
Igniters are wet or dirty.
Burner ignites but fl ame is large, distorted, or
yellow.
Burner ports are clogged.
Unit is being operated on wrong type of gas.
Air shutters not properly adjusted.
Strong odor and/or smoke is noticed fi rst few
times oven is used.
This is normal burn off of insulation and protective oils in oven.
This will go away after using oven a few times.
Oven indicator light on; oven will not heat.
Oven is operating properly. Unit will resume heating
function once it has cooled.
Troubleshooting
