manualshive.com logo in svg
background image

2

MODEL 

   WIDTH BLOWER 

(purchased 

separately)

VDD5300/CVDD5300   

 

30" W.   

VDVI600 Interior or VDVE900 Exterior

VDD5360/CVDD5360   

 

36" W.   

VDVI600 Interior or VDVE900 Exterior

VDD5450/CVDD5450   

 

45" W.   

VDVI600 Interior or VDVE900 Exterior, VDVE1200 Exterior

VDD5480/CVDD5480   

 

48" W.   

VDVI600 Interior or VDVE900 Exterior, VDVE1200 Exterior

WARNING

READ AND SAVE THESE INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY 

TO PERSONS, OBSERVE THE FOLLOWING:

1.  Use this unit only in the manner intended by the manufacturer. 

If you have questions, contact the manufacturer at the address 

or telephone number in the warranty.

2.  Before servicing or cleaning unit, switch power off at service 

panel and lock the service disconnecting means to prevent 

power from being switched on accidentally. When the service 

disconnecting means cannot be locked, securely fasten a 

prominent warning device, such as a tag, to the service panel.

3.  Installation work and electrical wiring must be done by a 

qualified person(s) in accordance with all applicable codes 

and standards, including fire-rated construction codes and  

standards.

4.  Sufficient air is needed for proper combustion and exhausting 

of gases through the flue (chimney) of fuel burning equipment 

to prevent backdrafting. Follow the heating equipment 

manufacturer’s guideline and safety standards such as those 

published by the National Fire Protection Association (NFPA), 

and the American Society for Heating, Refrigeration and 

Air Conditioning Engineers (ASHRAE), and the local code 

authorities.

5.  When cutting or drilling into wall or ceiling, do not damage 

electrical wiring and other hidden utilities.

6.  Ducted fans must always be vented to the outdoors.
7.  To reduce the risk of fire, use only metal ductwork.
8.  Do not install this product with the activating switch directly 

behind a burner or element. Minimum distance between the 

switch and the edge of the burner should be 4 inches.

9.  Loose-fitting or hanging clothing should never be worn when 

operating this appliance. They may be ignited by burners/

elements on cooktop.

10. Children should not be left alone or unattended in the area 

where this appliance is in use.

11. This unit must be grounded.
12. To reduce the risk of fire or electric shock, it is recommended 

that the downdraft be installed with a dedicated circuit separate 

from the appliance.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

a)  Never leave surface units unattended at high settings.  

 

Boilovers cause smoking and greasy spillovers that may  

 

ignite. Heat oils slowly on low or medium settings.

b)  Always turn hood ON when cooking at high heat or when 

cooking flaming foods.

c)  Clean ventilating fans frequently. Grease should not be  

 

allowed to accumulate on fan or filter.

d)  Use proper pan size. Always use cookware appropriate  

 

for the size of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT 

OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING*:

1.  SMOTHER FLAMES with a close-fitting lid, cookie sheet, or 

metal tray, then turn off the burner. BE CAREFUL TO  

 

PREVENT BURNS. If the flames do not go out immedi- 

 

ately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2.  NEVER PICK UP A FLAMING PAN - You may be burned.
3.  DO NOT USE WATER, including wet dishcloths or towels - a 

violent steam explosion will result.

4.  Use an extinguisher ONLY if:
 

A.  You know you have a Class ABC extinguisher, and you    

 

 

already know how to operate it.

      B.  The fire is small and contained in the area where it  

 

  started.
      C.  The fire department is being called.
      D.  You can fight the fire with your back to an exit.
* Based on “Kitchen Firesafety Tips” published by NFPA.

CAUTION

1.  TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT INSTALL 

WITH COOKING PRODUCTS THAT HAVE A GRIDDLE.

2.  For indoor use only.
3.  For general ventilating use only. Do not use to exhaust 

hazardous or explosive materials and vapors.

4.  To avoid motor bearing damage and noisy and/or unbalanced 

impellers, keep drywall spray, construction dust, etc. off power 

unit.

5.  Clean filters and grease-laden surfaces frequently.
6.  Do not repair or replace any part of this appliance unless 

specifically recommended in this manual. All other servicing 

should be done by a qualified technician.

7. Please read specification label on product for further 

information and requirements.

8.  To reduce the risk of fire and electric shock, install this downdraft 

only with blower models shown below. Other blower models 

cannot be substituted. (Blowers sold separately).

 

Flex Blower Model VDVI600

 

Exterior Blower Models VDVE900, VDVE1200

INSTALLER:  

Save this manual for Electrical Inspector 

and Homeowner to use.

Содержание 5 Series





































Отзывы: