13 |
P a g e
Viking Pure, LLC
511 Pullman Rd., Suite C5 Edgewater, Fl. 32132, USA
© Viking Pure, LLC 2015
Adding Salt
1.
Loosen salt tube cap
(Item #2 on Pg. 4 of Manual)
.
2.
Open salt tube drain valve
(Item #6 on Pg.4 of Manual)
at base of control and
allow liquid to drain into a container (
Do not dispose of this liquid, it is used in
later steps
).
3.
When liquid stops draining close manual valve (
Liquid will stop draining on its
own at the correct level
).
4.
Fully remove salt tube cap (
Item #2 on Pg. 4 of manual
)
5.
Begin filling salt tube with salt, stopping when approximately
¼” of space is
still visible through clear salt tube.
6.
Fill with the liquid drained (From step 2) to ½" from the top of the tube.
7.
Ensure the outer surface of the tube is free from salt.
8.
Replace the salt tube cap, but only until you feel it starts to get tight then stop.
