
10 |
P a g e
Viking Pure, LLC
501 Pullman Rd., Edgewater, Fl. 32132, USA
Copyright 2012 Viking Pure, LLC©
Setting Up your Control
Instructions
1. *Properly secure control to a vertical surface using 2 mounting locations.
2. Attach tubing (Included) to the proper fitting on base of control. (Make sure you
connect the right tubing from the HOCl and NaOH outlets, on bottom of control,
to the correct tanks).
3. Install water filter (Included) on water supply and run tubing (Included) to the
“Filtered Water Inlet” located at the base of the control. .
4. Connect power cord(s) (Included) to the control, lower left side, and to an outlet
corresponding to the correct voltage of the unit.
*
Mounting hardware not included.