Viking pump 3-551-050-276 Скачать руководство пользователя страница 8

© 04/2019 Viking Pump, Inc. All rights reserved.

WARRANTY

Viking pumps, strainers and reducers are warranted to be 

free of defects in material and workmanship under normal 

conditions of use and service. The warranty period varies by 

type of product. A Viking product that fails during its warranty 

period under normal conditions of use and service due to a 

defect in material or workmanship will be repaired or replaced 

by Viking. At Viking’s sole option, Viking may refund (in cash 

or by credit) the purchase price paid to it for a Viking product 

(less a reasonable allowance for the period of use) in lieu of 

repair or replacement of such Viking product. Viking’s warranty 

is subject to certain restrictions, limitations, exclusions and 

exceptions.  A  complete  copy  of  Viking’s  warranty,  including 

warranty periods and applicable restrictions, limitations, 

exclusions  and  exceptions,  is  posted  on  Viking’s  website 

(www.vikingpump.com/warranty/warranty-info).  A  complete 

copy of the warranty may also be obtained by contacting 

Viking through regular mail at Viking Pump, Inc., 406 State 

Street, Cedar Falls, Iowa 50613, USA.

THIS  WARRANTY  IS  AND  SHALL  BE  VIKING’S  SOLE 

AND EXCLUSIVE WARRANTY AND IS IN LIEU OF 

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING, BUT NOT LIMITED TO, ALL WARRANTIES 

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR 

PURPOSE AND NON-INFRINGMENT, ALL OF WHICH 

OTHER WARRANTIES ARE EXPRESSLY EXCLUDED.
THE RIGHTS AND REMEDIES UNDER THIS WARRANTY 

ARE AND SHALL BE THE SOLE AND EXCLUSIVE RIGHTS 

AND REMEDIES AGAINST VIKING. EXCEPT FOR THE 

SPECIFIC LIABILITIES AND OBLIGATIONS PROVIDED 

UNDER THIS WARRANTY, VIKING SHALL HAVE NO 

LIABILITY OR OBLIGATION WITH RESPECT TO ANY 

PRODUCT CLAIMED TO BE DEFECTIVE IN ANY MANNER.
UNDER NO CIRCUMSTANCES SHALL VIKING BE 

LIABLE UNDER THIS WARRANTY OR OTHERWISE FOR 

SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR 

PUNITIVE DAMAGES OF ANY KIND, INCLUDING, BUT NOT 

LIMITED TO, LOST OR UNREALIZED SALES, REVENUES, 

PROFITS, INCOME, COST SAVINGS OR BUSINESS, LOST 

OR  UNREALIZED  CONTRACTS,  LOSS  OF  GOODWILL, 

DAMAGE TO REPUTATION, LOSS OF PROPERTY, LOSS 

OF INFORMATION OR DATA, LOSS OF PRODUCTION, 

DOWNTIME, OR INCREASED COSTS, IN CONNECTION 

WITH ANY PRODUCT, EVEN IF VIKING HAS BEEN ADVISED 

OR PLACED ON NOTICE OF THE POSSIBILITY OF SUCH 

DAMAGES AND NOTWITHSTANDING THE FAILURE OF 

ANY ESSENTIAL PURPOSE OF ANY PRODUCT.

TECHNICAL SERVICE MANUAL:

 INSTALLATION, OPERATION & MAINTENANCE

© 2019 Viking Pump, Inc. • Cedar Falls, IA  

VISIT VIKINGPUMP.COM FOR PDF OF CURRENT TSM ISSUE & TO VIEW REPAIR VIDEOS

TSM

1984

Page 8 of 8
Issue A

PARTS & ACCESSORIES

HELICAL OFFSET GEAR REDUCERS

SIZES:

 A, B, C

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

© Viking Pump, Inc.

Содержание 3-551-050-276









Отзывы: