2
TO REDUCE THE RISK OF INJURY, READ AND UNDERSTAND ALL
INSTRUCTIONS BEFORE USING THIS PRODUCT. FAILURE TO
FOLLOW ALL INSTRUCTIONS BELOW MAY RESULT IN SERIOUS
PERSONAL INJURY.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
GENERAL SAFETY IN STRUCTIONS
Do not store this product outdoors or in a humid environment, as this may
cause damage to the product.
When using this product in the work platform mode, keep your feet firmly
planted in the center of the platform. Do not step on the four corners of
the product surface, as this may cause the product to tip over and result
in personal injury.
When using this product in the work platform or workbench modes, place
objects in the center of the product’s surface. Placing objects on the
corners may cause the product to tip over.
When using this product in the creeper or dolly modes, do not step or
stand on this product, as this may cause personal injury.
When extending or retracting the legs, do not use excessive force, as this
may damage the product.
Before using this product, make sure that the legs are firmly locked in
position and the latches are closed tightly over the top panel.
Do not use or alter this product for any purpose other than specified in this
manual.
When using this product with power tools, refer to the manufacturer’s
instructions for how to properly use electric tools. Always wear safety
goggles.
WEIGHT CAPACITIES
Do not exceed the following weight capacities:
MO DE
WEI GHT CAPA CI TY
Workbench
330 lbs (150 kg)
Work platform
330 lbs (150 kg)
Dolly
265 lbs (120 kg)
Creeper
265 lbs (120 kg)
WORKBENCH MODE
Holes and slots are located in both
sides of the product for convenient
placement or storage of tools.
Length and angle measurements
are printed on the work surface
for your reference. In the center
of the protractor, there is also a
drilling hole.
On one side of the work surface,
there is a durable hammer and
cutting surface.
CAUTION: Do not use excessive
force when hammering. If the legs
absorb excessive force, they may
be damaged.
WORK PLATFORM MODE
Stand in the centre of the platform
surface. Do not stand or step on
the locations marked with X’s in the
figure to the right, as this may cause
the product to tip over and result in
personal injury.
Place objects in the centre of the
platform surface. Exercise caution
when moving tall objects to prevent
them from sliding or falling over.
CAUTION: Do not step or stand on
the work platform surface in dolly
mode.
Two holes are provided in the
side of the product for attaching
a traction rope connector when
moving heavier objects.
Exercise caution when moving
heavy objects.
Use this mode to perform jobs in low
spaces. Also put the product into
this mode when storing or moving it.
A carrying handle is provided.
CAUTION: Do not step or stand on
the work surface in creeper mode.
CREEPER MODE
DOLLY MODE
120
kg
EN
