PART 2. DONNING AND FITTING
2.1. VIHELM SET:
1. Open the ring on the blower case, put the filter in and close the ring
2. Put everything on a flat surface (like a tabletop)
3. Put the battery and blower into the pouches
4. Open the belt
5. Pull out the adhesive strip at the back of the pouches
6. Place the battery and blower pouches onto the belt with the strips
under it and press the strips and the pouches together
7. Place the blower onto the belt with the handle under it
8. Connect the cable connector to the blower then to the battery
9. Connect the breathing tube to the helmet
10. Put the helmet on (chin in first)
11. Turn the knob on the adjustable strap cloc
kwise to fasten it until
the helmet stays firmly on your head
12. Connect the other end of the breathing tube to the blower
13. Press the button on the battery to turn on the blower
14. Turn the knob on the blower to adjust the airflow rate
6
