IMPORTANT
!
WAIT 24 HOURS BEFORE USING SHOWER
DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS
MODEL VG06073
13
G. INSTALLING THE DOOR BOTTOM SEAL STRIP
1.
Clean the door glass panel (#1) edges where the door bottom seal strip (#4) is to be installed
with rubbing alcohol.
2.
The door bottom seal strip (#4) will have to be fit and cut to the proper size.
3.
Verify that the lip of the seal strip faces toward the inside of the shower cabin before seal strip
installation.
4.
Install the seal strip according to the diagram. [SEE FIG.10]
NOTE: If the seal strips are not flat, use a hair dryer to apply minimal heat and press the seal strip back into
position.
4
FIG.10
3
4
1
1
4
10
