19
MODEL VG06042
MODEL VG06042
G1
G2
G. INSTALLING THE DOOR THRESHOLD
1. Measure the distance from side to side under
the door and cut the threshold to the proper
length. Note that there are screw holes on
both sides of the threshold, this makes the unit
reversible. Please make sure the threshold
end with a screw hole (that was not cut off
during the sizing process) should be always
placed by the side of hinge base mirrored (#2).
2. Place the left threshold end cup (#28) on the
left end of the door threshold (#11). Then
carefully align the door threshold and
threshold end cup under the door panel. The
threshold end cup should be placed against
the turning point of the hinge base mirrored,
while the other end of threshold should be
placed against the wall.
2
VIEW WITH PART
4 REMOVED
11
SCREW HOLE
2
VIEW WITH PART
4 REMOVED
11
28
6
28
11
2
SCREW HOLE
