VIGO Matte Stone VG04010, Технические характеристики

Страница: 16 / 30

5
PART
PART #
SUPPLY DATE INDICATOR (INTERNAL USE ONLY)
PARTS LIST -
For any parts needed but not shown, please contact Vigo Technical Support
TOLL FREE: (866) 591 - 7792
E-Mail: techmail@vigoindustries.com
www.vigoindustries.com
\\192.168.10.252\todd$\certification logos\AB1953.jpg
NSF / ANSI 61
TROUBLESHOOTING
PROBLEM POTENTIAL CAUSE CORRECTIVE ACTION
1 - Leaks from handle
2 - Insufficient flow rate
3 - Leak at connection points
4 - Loose faucet body
1.A - Cartridge unseated
1.B - Cartridge defective
3.A - Flexible hose leaking at connection point
3.B - Washer defective
4. - Mounting hardware became loose
3.A - Tighten hoses. If this does not resolve the issue, remove
the flexible hose and rethread, checking to make sure the
connection is secure. Make sure to use pipe tape.
1.B - Contact Vigo Technical Support for replacement.
1.A - Remove cartridge from housing, wash thoroughly with hot
water and reseat in housing.
3.B - Remove supply line and check the status of the washer. If
torn, washer must be replaced for a secure, non-leaking
connection.
4. - From under the counter, use an adjustable wrench and
tighten the mounting hardware. Make sure the faucet is
perpendicular to the counter.
5 - Loose handle
5. - Set screw has become loose
5. - Take off hot/cold cover on handle. This will give you access
to the screw that connects the handle to the cartridge. Using
either an allen key or a flat head screw driver, tighten the screw
so handle has firm connection to cartridge.
2.$ - Clog in supply hose / line
2.% - Clog in copper supply pins
2.$ - Remove supply lines and flush lines.
2.% - Remove copper pins and flush/clean out.
68101
Face Plate
68105
Spout
Spout Rear Set Screws
Cartridge Housing
Handle 68104 P
Cartridge Holder Ring
Spout Adapter 68099
68102
68103
68106
Spout Bottom Set Screws 68107
Valve Housing 68094
P
P
P
P
P
P
P
P
1.2 gpm flow restrictor 68108 P
P
Cartridge 74040