25
V1.0
Vig770S Motherboard Manual
3.5 Removing Memory
To remove a DIMM, follow these steps:
Observe the precautions in "Before You
Begin”.
Turn off all peripheral devices connected to the computer. Turn off the
computer.
Remove the computer cover.
Gently spread the retaining clips at each end of the socket. The DIMM pops
out of the socket. Hold the DIMM by the edges, lift it away from the socket,
and store it in an antistatic package.
Reinstall and reconnect any parts you removed or disconnected to reach the
DIMM sockets.
3.6 PCI Express 3.0/2.0 x16 slots
The PCI Express slot supports the PCI Express interface expansion card. The PCI
Express x16 slot supports up 4.0 GB/s transfer rate.
Figure 12: PCI Express Slot
Note: When adding or removing expansion cards, make sure that you power off the system first.
Important: When adding or removing expansion cards, always turn off the power supply and unplug
the power supplies,
power cable from the power outlet. Read the expansion card’s documentation to
check for any necessary additional hardware or software changes.
