Vig451J Motherboard Manual
20
Motherboard Jumper Settings
Clear CMOS
Instead of pins the
“jumper” to Clear CMOS consists of contact pads to prevent the
accidental clearing of CMOS. To clear CMOS, use a metal object such as a small
screwdriver to touch both pads at the same time to short the connection. Always
remove the AC power cord from the system before clearing CMOS.
Figure 7:
CMOS Clear
Note:
For an ATX power supply, you must completely shut down the system, remove the AC power
cord and then short the Clear CMOS pads.
Clear ME
To Clear ME you are required to bridge two Pins with a metal device such as a small
screwdriver. Always remove the AC power cord from the system before clearing ME.
