Vig410P Motherboard Manual
32
T-SGPIO Headers
Two SGPIO (Serial General Purpose Input/Output) headers are located on the
Motherboard. These headers are used for SATA monitoring on the backplane. Refer to
the board layout below for the locations of the headers.
A-
T-SGPIO-1
B-
T-SGPIO-2
Figure 14:
Power SMB and SGPIO connectors
CD-In Connector
There is a 4-pin CD header (CD1) on the Motherboard. This header allows you to use
the onboard sound for audio CD playback. Connect an audio cable from your CD drive
to the CD header that fits your cable's connector.
A-
CD-In
Figure 15:
CD-In connector
A
