manualshive.com logo in svg

Viglen Dossier LT, Руководство пользователя, Страница: 94 / 186

Поделиться
Скачать
Viglen Dossier LT Скачать руководство пользователя страница 94

Advanced Controls

3 - 28 Battery Information

3

Battery Information

Please follow these simple guidelines to get the best use out of your battery.

New Battery

Always completely discharge, then fully charge, a new battery (and subse-
quently at least once every 30 days or after about 20 partial discharges) before
using it (see 

“Battery FAQ” on page 3 - 29

 for instructions on how to do this).

Battery Life

Your notebook computer’s battery life is dependent upon many factors, in-
cluding the programs you are running, and peripheral devices attached. Power
Options settings in the OS will help prolong the battery life if configured ap-
propriately.

Battery life may be shortened through improper maintenance. To optimize the
life and improve its performance, fully discharge and recharge the battery at
least once every 30 days.

We recommend that you do not remove the battery yourself. Please consult
your service representative should you need to remove the battery for any rea-
son.

Caution

Danger of explosion if
battery is incorrectly
replaced.

Replace only with the
same or equivalent
type recommended by
the manufacturer. Dis-
card used battery ac-
cording to the
manufacturer’s in-
structions.

Содержание Dossier LT



























































































































































































Отзывы:

Нет отзывов