background image

D865GLC Motherboard Manual 

9

System Processor 

 

The D865GLC motherboard supports a single Pentium 4 processor. The processor’s 
VID pins automatically program the voltage regulator on the motherboard to the 
required processor voltage. In addition, the front side bus speed is automatically 
selected. The motherboard currently supports processors that run internally up to 
3.06GHz and have a 512 KB second-level cache running at full CPU Speed.  
 
The processor implements MMX ™ technology and maintains full backward 
compatibility with the 8086, 80286, Intel386 ™, Intel486 ™, Pentium, Pentium Pro, 
Pentium II & Pentium III processors. The processor’s numeric coprocessor 
significantly increases the speed of floating-point operations and complies with 
ANSI/IEEE standard 754-1985.

 

 
Microprocessor Packaging 

 

The Pentium 4 processor comes in a micro PGA 478 package that connects to the 
motherboard through a socket 478 connector.  The package consists of: 
 

  Processor card including the processor core and the second-level cache, 

burst pipelined synchronous static RAM (BSRAM) and tag RAM. 

 Thermal 

plate. 

 Back 

cover. 

 
Second Level Cache 
 

The second-level cache is located on the die of the CPU itself. The cache includes 
burst pipelined synchronous static RAM (BSRAM) and tag RAM. All supported 
onboard memory can be cached. 

 

Processor Upgrades 
 

The motherboard can be upgraded with a Pentium 4 processor that runs at higher 
speeds.  

 

System Memory 

 
Main Memory  

 
The motherboard has four DDR SDRAM Dual Inline Memory Module (DIMM) 
sockets. Support for up to a maximum memory size of 4GB. The BIOS automatically 
detects memory type, size, and speed. 
 
The motherboard supports the following memory features: 

 

  2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts 

  Unbuffered, single-sided or double-sided DIMMs with the following restriction: 

 

Содержание D865GLC














































































































Отзывы: