Application Drawings
Vi3602 Gigabit Ethernet and 30W PoE++ Repeater User’s Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Installation (Powered by Local Power Supply)
The Smart Choice for Transmission Solutions
www.vigitron.com
Important Safety Warning
Installation (Powered by PoE)
- Read and keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should conform to all local
codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage wiring.
- To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture,
dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
- DO NOT install the unit in a place where the operating ambient temperature exceeds 70°C
or
is below - 10°C.
- Make sure that the external power supply output voltage is in the recommended range.
- Do not install near any heat sources such as radiators, heat registers, stoves or other
apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at power source,
convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as when a power supply cord or plug is damaged, liquid
has been spilled, objects have fallen inside the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
- The main plug is used as the disconnect device and shall remain readily operable.
PoE Switches
MaxiiNet
™
a) Port-2 (PoE Out) Connection:
- Connect the IP camera’s RJ45 connector to Port-2 of Vi3602 using a
standard Cat5/6 cable of maximum 100m in length. This port can
provide up to 30W PoE power depending on the input PoE.
b) Port-1 (PoE-In) Connection:
- Connect Port-1 of Vi3602 to the PoE switch or a high power PoE source
using a standard Cat5/6 cable of maximum 100m in length. This port can
receive up to 30W PoE and data 1Gbps.
a) Port-2 (Poe Out) Connection:
- As “a” in previous section.
b) Port-1 (PoE-In) Connection:
- Connect Port-1 of Vi3602 to the network switch using a standard Cat5/6
cable of maximum 100m in length.
c) Power Connection:
- Connect power connector from Vi1120 120W desktop power supply for
using full PoE capacity of Vi3602. If the application does not provide PoE, a
Vi0014 can be used for just powering the Vi3602.
The Vi3602 is an Ethernet and 30W PoE repeater that provides a cost
effective method for increasing distances beyond the Ethernet limit of 328
feet (100m) for IT or CCTV installations at network speeds up to 1000Mbps.
Each unit can extend Ethernet and PoE for 328 feet (100m). Multiple units
can be cascaded to reach the desired distances. The Vi3602 is a high
performance device that meets the demands for the highest PoE powered
PTZ domes and LED lighting eliminating the need for local power or
providing the ability to add PoE power.
Removable mounting brackets make installation an easy process. The
Vi3602 is the perfect solution for any IP transmission application. Up to 4
units can be combined to achieve a distance of 1,450 feet (442m) for IP
video, PoE, and data transmission.
It is an ideal solution for extending data, video, and power from PoE
switches, Midspans, Power Source Equipment (PSE) and extending
communications between network switches.
PoE Switch
Network Switch
Cat5/6 328 ft.
1000BaseT
Cat5/6 328 ft.
1000BaseT
Vi3602
Data
NVR
Vi3602
328 Feet
328 Feet
Vi30005
Cameras
Vi1120
Data
NVR
Vi30005
IP Cameras
Vi3602
328 Feet
328 Feet
Vi1120
PoE Distance # of Vi3602
20W
850 ft. (259m) 2
16W
1,150 ft. (350m) 3
11W 1,450 ft. (442m) 4
Multiple Vi3602 can be used to extend Ethernet and PoE.
The maximum reach of PoE will be:
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a main socket outlet through an AC to DC Power supply.
WARNING! - The main plug is used as the disconnect device and
shall remain readily operable.
