VigilLink VL-VW29-1, Руководство пользователя

Страница: 5 / 14

- 3 / 12 -
No. Name Function Description
1 Power LED
Power LED will be on when the unit is powered on.
2 INPUT LED
The LED will be on when the corresponding HDMI input port is
connected to an active HDMI source device.
3 LOOP LED
The LED will be on when the corresponding LOOP OUT port is
connected to the HDMI display device.
4
OUTPUT LED
(1-9)
The LED will be on when the corresponding HDMI output port is
connected to the HDMI display device.
Rear Panel
No. Name Function Description
1 INPUTS
HDMI signal input ports, connect to HDMI source devices such
as DVD or PS4 with HDMI cable.
2 LOOP OUT
HDMI signal loop out ports. Loop out HDMI A/B signal
downstream. It can be configured by the RS-232 command.
3 OUTPUTS HDMI signal scaling output for video wall.
4 110-240VAC 110-240V AC power input port.
5 GND Ground the product housing.
6 AUDIO OUTPUT
TOSLINK:
•
Analog L/R audio output
3.5mm Stereo Jack. 20Hz ~ 20kHz, 1.5Vrms max
•
Digital SPDIF audio output
BALANCED OUT: Balanced audio output port. 5-pin phoenix
connector, 20Hz ~ 20kHz, 1.5Vrms max.
BALANCED OUT: Balanced audio output port. 5-pin phoenix
connector, 20Hz ~ 20kHz, 1.5Vrms max.
7 SERVICE Firmware update port.
8 CONTROL
RS232: Bypass RS232-CTL commands to the next unit.
RS232-CTL: External RS-232 control, Baud Rate: 57600
Data Bits:8, Parity: None Stop Bits:1
LAN: Network port for TCP/IP control. Connect to an active
Ethernet link with an RJ45 cable.