0
℃
~50
℃
0.086 dB/m to 0.14 dB/m
Operating Instructions
1. Working principle
The sensor sends
a
signal to the paired main panel when the built-in smoke sensor is triggered.
2. Pairing with main panel
①
Scan the QR code on this accessory
using the
App.
②
The pairing result can be confirmed in
the
App.
Press the test button.
*
Test:
The alarm is provided with a test button. Press this until the alarm signal sounds. The signal stops once the
button is released. Test the alarm at least once a week.
Appearance
Features
The wireless smoke sensor is an accessory of
the VIGILATE smart alarm system.
Thanks to its
unique design and MCU
that
work
s
with photo-electricity signal
s
, it is dust-proof, pest-proof, anti-optical
interference, etc.
This product responds well to smoldering and burning
smoke
.
With
a
build-in photoelectric smoke sensor, it
will trigger
an
alarm when the smoke density reaches the alarm threshold.
Parameters
Installation & Notice
• Open the
case and insert the battery.
•
Pairing it with
the
main panel before installing.
•
Choose a proper position, normally the center of the detection area ceiling is recommended. Please fix the sensor base into
the chosen position with screws. Be sure it is fastened tightly.
•
Avoid installing sensor in places with:
• s
tagnating smoke
• h
eavy dust, heavy water mist or heavy oil mist
• g
reat humidity(>95%)
• high wind speed(>5m/s)
•
To ensure the sensitivity, please clean the sensor surface with soft bristled brush every 6 months. Make sure to turn off the
power before cleaning.
• Con
tact your dealer when there is any problem about the product. DO NOT attempt to repair the sensor personally.
•
The sensor can reduce the happening rate of disasters. But there is no
guarantee
that you will be completely protected.
For your safety, please use this sensor properly and be vigilant in
your
daily life.
Please regularly clean the sensor to keep it free of dust particles and ensure it is in proper working condition
.
If the
alarm fails to operate correctly, please contact the dealer .
•
Working Voltage
DC 9V
•
Battery
9V
Alkaline
•
Working Current
≤50mA
•
Standby Current
≤20µA
•
Alarm Sound
≥ 85dB/30cm
•
Product Certification
BS EN 14604: 2005
•
•
Transmission Distance
Without obstacle 500m
•
Transmission Frequency
433.92MHz
•
Working Temperature
•
Humidity
10%~90%rh (non-condensing)
•
Weight
98.7g (battery not included) 134.5g(battery included)
•
Dimension
Φ
107x34mm (LxWxH)(±0.1mm)
Test Button &
LED Indicator
Back Cover
buzzer
Smoke Sensitivity
Hint: How to trigger