Operating Instructions
1.
Working principle
With digital dual-core fuzzy logic operative program-
ming and intelligent analysis, it accurately detects hu-
man body movement with infrared sensor and sends
a
signal to main panel.
2. Pairing with main panel by App
①
Scan the QR code on the sensor.
②
The pairing result can be confirmed in App.
3. Product testing
①
Power on, LED indicator would flash for 1s.
It takes about 30s to do a self-check.
②
To verify this product is installed properly,
please walk in the sensing area to test.
Trigger Interval Time
Setting Switch
(Every 5s or 5min.)
Infrared Sensor
Features
The wireless motion sensor is an accessory of the VIGILATE Smart Alarm System.
It accurately detects human body movement. Featured with automatic temperature compensation technology, it ensures
high intelligence, sensitivity, and stability.
It has a modern and elegant appearance. With technology like RF supervision, anti-tamper protection, energy saving and
low battery warning, it’s easy to set up and use.
Parameters
•
Working Voltage
DC 3V
•
Battery
2 × AA battery(1.5V)
•
Working Current
≤100mA
•
Standby Current
≤15µA
•
Detecti
on
Range
100°
•
Detecti
on
Distance
9m
•
Immunity of pets
Weight
：
≤20KG
•
Transmission Distance
Up to 1000m without obstacle
•
Transmission Frequency
433.92MHz
•
Working Temperature
•
Humidity
≤90%rh (non-condensing)
•
Weight
147g (battery not included) 194g (battery included) 65g (Bracket)
•
Dimension
100x60x48mm
Φ
55x32mm(Bracket) LxWxH(±0.1mm)
10°-20°
1.8-2.2m
9m
5m
1m
Detecting Area View (side view
)
Detecting Area View (top view)
+6m
-6m
110°
Installation & Notice
• Pull out and remove the battery plastic strip.
• Pairing with main panel by App before installing.
•
Fix the bracket to the wall using the screws included, connect the sensor to
bracket, adjust to the proper angle.
• Recommended to install at height of 1.8-2.2m from ground, with gradient 10°~20°.
• Make sure there is no
temptation
for pet
s
to pass by, like stair
s,
etc.
•
Indoor use only. Avoid installing the sensors in an area with strong light, rapid
temperature changes, direct sunshine, heat source or the air stream flows
frequently, like close to windows, air- conditioners, and under rotating objects.
•
Because the sensor is more sensitive to cross movement than vertical movement,
it works best when the detecting direction is vertical to the people's walking
direction.
•
To ensure the device is working, please perform a walk test periodically, once a
week recommended.
-10
℃
~50
℃
Detection Window
Tamper and Magnet
LED Indicator and Test Button
Stainless-steel Bead
Bracket
Battery Strip
Appearance
Screw Mounting Hole
