Operating Instructions
Installation & Notice
1. Working principle
With digital dual-core fuzzy logic operative program-
ming and intelligent analysis, it accurately detects hu-
man body movement with
the
infrared sensor and
sends
a
signal to
the
main panel.
2. Pairing with main panel by App
①
Scan the QR code on the sensor.
②
The pairing result can be confirmed in App.
3. Product testing
• Pull out and remove the battery insulative plastic strip.
• Pair
with
the
main panel
using the
App before installing.
• Fix the bracket
to the
wall
using the screws included
, connect the sensor to
bracket, adjust
to the
proper
angle.
• Recommended to install at
a
height of 1.8-2.2m from ground, with gradient 10°~20°.
•
Make sure there is no temptation for pets to pass by, like stairs, etc.
• Indoor use only. Avoid installing the sensors in
an
area with strong light,
rapid
temperature
changes
,
direct sunshine, heat source
or the air stream flows frequently,
like close to windows, air- condition
ers,
and under rotating objects.
•
Because the sensor is more sensitive to cross movement than vertical movement, it
works best when the detecting direction is vertical to the people's walking direction.
•
T
o ensure
the device is working, please perform a
wal
k
test periodically, once a
week recommended.
Detecting Area View (top view)
+6m
-6m
110°
Trigger Interval Time
Setting Switch
(Every 5s or 5min.)
Infrared Sensor
•
Working Voltage
DC 3V
•
Battery
2 × AA battery(1.5V)
•
Working Current
≤100mA
•
Standby Current
≤15µA
•
Detecti
on
Range
100°
•
Detecti
on
Distance
9m
•
Transmission Distance
Up to 1000m
line of sight
•
Transmission Frequency
433.92MHz
•
Working Temperature
•
Humidity
≤90%rh (non-condensing)
•
Weight
147g (battery not included) 194g (battery included) 65g (Bracket)
•
Dimension
100x60x48mm
Φ
55x32mm(Bracket) LxWxH(±0.1mm)
Detection Window
Tamper and Magnet
LED Indicator and Test Button
Stainless-steel Bead
Bracket
Battery Insulative Strip
Appearance
10°-20°
1.8-2.2m
9m
5m
1m
Detecting Area View (side view
)
①
Power on, LED indicator would flash for 1s.
It takes about 30s
to do a
self-check.
②
To verify this product is installed properly,
please walk in the sensing area to test.
Features
The wireless motion sensor is an accessory of
the VIGILATE
S
mart
A
larm
S
ystem.
It accurately detects human body movement
.
Featured with automatic temperature compensation technology, it ensures
high intelligence, sensitivity, and stability.
It has
a
modern and elegant appearance. With technology like RF supervision, anti-tamper protection, energy saving
and
low battery warning, it’s easy to set up and use.
Parameters
-10
℃
~50
℃
Screw Mounting Hole
