SwitchOne Specifications
Type
2.0 Powered Studio Monitor with Bluetooth
LF Drive
3.0 inch ,4Ω
HF Drive
0.75 inch silk domed tweeter, 6
Ω
Passive radiator
4.0 inch
Amplifiers Type
Class D
Woofer Amplifier Power
2 x 20 watts
Tweeter Amplifier Power
2 x 10 watts
Frequency response
45 Hz ~ 20 KHz
Crossover Frequency
3.0KHz
Inputs
TRS stereo balanced
RCA stereo
1/8” Aux stereo
Bluetooth
Output
1/8” TRS headphone
Bluetooth Version
5.0
Digital Signal Processor
SigmaDSP
Input Power
24V DC, 2.5A
AC Adapter Input Power
100-240 VAC, 50/60Hz
Dimension
110mm(W) x 180mm(H) x 180mm(D)
Net Weight:
3.4
Kg/Pair
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
