Vigilant MX1-Au, Руководство оператора

Страница: 85 / 182

Document: LT0439 Vigilant MX1-Au Operator Manual
Issue 1.73 23 October 2018 Page 7-1
Most service functions are available at Access Level 2. See Access
Levels on Page 1-11.
Critical service functions are available at Access Level 3 which is entered
on the keypad using a User Code and PIN at Access Level 2.
This chapter describes logging on to Access Level 3.
Refer to the page number listed in this table for information on a specific
topic.
Topic See Page
Logging On to Access Level 3 7-1
If the
MX1 display is not showing one of the base displays (Normal, Off-
Normal, Fault or the Alarm List), press CANCEL until the base display is
reached.
Press
MENU three times to reach the logon option.
| LOGON
| MX LOOP
| MEMORY
Press MENU for more options |
Fig 7-1 – Menu Options-Third Screen
Press
LOGON

F1 to see the logon display. Note that if no option is
shown at F1 , the MX1 is already at Access Level 3.
Chapter 7
Logging On to Access Level 3
Introduction
In this
Chapter
Logging On to Access Level 3
Logging On
AUTO ADD