Vigan Mammoth WK17B, Руководство пользователя, Страница: 9 / 12

str
9
• Do not fill the kettle or pour it out, when it is in the base. Unplug it before cleaning.
• When the kettle is not in use, unplug it from the socket.
• If any part of kettle or power cord is damaged in any way or is malfunctioning, do not use it and
contact the service.
• Kettle repair and the power cord replacement can only be done by a qualified service technician.
• Device and power cord must not come into contact with hot surfaces.
• The kettle must stand on a firm, flat surface.
• The kettle is only intended for use indoors, not outdoors.
• This device is intended only for heating of water, do not cook anything else.
• Do not handle the power cord with wet hands. Do not pull the wire, when unplugging, hold the plug.
• Use the unit only in locations where it can not fall over, and away from heat sources, flammable
objects and wet surfaces.
• Kettle is not intended for storing of liquids. Do not leave the water in it for more than four hours.
• Do not immerse device into water. Coupling connector at the base must not come in contact with water.
• Always make sure that the device is switched off when removing it from the power base, unpluging it
from the wall socket, when you are going to clean it, or you will not use it for a longer time.
• Keep the kettle and the power cord out of the reach of children and pets. When the device is used
near children, it is necessary to have control over them.
• This device is intended only for normal household. It should not be used in any other way than to
what is intended.
• Do not allow power cord to be hanging down from the desktop, to touch hot surfaces or be tangled.
• Do not fill above the MAX mark. Boiling water can spray out when the kettle is overfilled.
• The device contains no parts that can be repaired by the user.
• To prevent damage by steam, turn the spout away from walls, use kettle only in places where it can
not tip over, and away from any source that generates heat (eg. fireplaces, stoves, ovens, stoves, grills
or stoves) from flammable objects (eg . tablecloths, curtains, blinds fabric etc.) from moist surfaces
(eg. bathtubs, sinks, washbasins etc.).
BeFoRe use
1. Remove the kettle and power base of all packaging materials and dispose of them in order to not
fall into the hands of children (choking hazard). But do not remove the label attached on the bottom
of the kettle and the bottom of the base.
2. Ensure that those power supply voltage of the kettle corresponds to your power grid.
3. Before using the kettle for the first time or if you have not used it for some time, fill it to the MAX
mark with water and boil. Pour out this water and refill the kettle with cold water.
insTRucTions FoR use
1. During filling, always first remove the kettle from the power base.
2. Lift the lid.
3. Fill the kettle between the MIN and MAX with cold water.
4. Close the lid and return kettle to the power base.
Make sure the lid is firmly on the kettle, before you start to boil the water.
5. Plug the power base into an active power socket.
6. Start to boil water by pushing ON / OFF switch to the lower position.
7. Power indicator lights up and the kettle starts to boil.
DO nOT LeaVe THe LiD OPen DurinG BOiLinG.
8. Kettle will turn itself off, when the water is boiled.
9. Cooking can be interrupted at any time by moving the switch to the OFF position.