str
14
ASSEMBLY
Filter bag:
Carefully put on the stack dust filter bag. Do not use product without filter bag, it can
damage the vacuum cleaner!
Attention! Filter bag is partly made of fiberglass
and by careless handling it can be easily damaged.
Dust bin:
Attach the dust bin to cover of the appliance.
Flexible hose:
Connect the hose end into the air inlet hole.
Aluminum nozzle:
Connect aluminum nozzle to the air inlet on flexible hose, if you
want to vacuum the ashes.
Plastic tubes:
Attach the plastic tube to the air inlet on the flexible hose,
when you want to vacuum materials other than ash.
Brush:
When you want to vacuum with a brush, connect it to the air inlet on the plastic pipe.
Function of blowing air:
Plug one end of the hose to the outlet opening. Now you can for example blow off dirt
from hard to reach places. Switching on and off is the same as a normal vacuuming.
USE
• Before you start, make sure that the dust filter is in place.
• Unroll the power cord. (Length of 3,5 m)
• Make sure that the switch to O (off) and plug its power cord into the outlet.
Switch on the power switch to the position I (on).
• After use, unplug from the wall.
• When the gauge on top of the vacuum cleaner is red, replace or clean the filter.
• Vacuum only cold ashes ≤40°C!
• Connect to the cleaner the necessary accessories.
Vacuuming ash
Vacuuming floors
