uSE of rollEr for nail filinG
Set includes roller, which is half grey and half white. Grey part makes nail edges smoother. Use
it for max. 2 seconds on each nail. Use it only once every two weeks. White part polishes a nail.
Use it for max. 2 seconds on each nail.
1. Push the button for head removing. Remove the head and put on white-grey roller.
2. Move the switch to the right to turn the device on.
3. First file nail edge using the grey part.
Then polish the nail using the grey part.
4. Turn the device off.
5. Clean the roller using the brush.
uSE of thE rollEr for calluSES
and dry Skin rEmovinG
The set contains two rollers of different roughness - coarser and smoother. Use coarser cylinder for
the basic removal of hard skin and smoother for cleaning after that. Rollers are designed for smoothing
dry cracked skin of the feet and heels. Do not use this device on the other parts of the body.
1. Push the button for head removing. Remove the head and put on green roller you need.
2. Move the switch to the right to turn the device on.
3. Gently sweep the roller in different directions over the spot with dry or hard skin for 2-3 seconds.
Do not push on the device or you will block it. Make sure that you achieve the fineness of the
skin you want. If not, use again for 2-3 seconds and then check again. If you have a foot thick layer
of hardened skin, we recommend daily treatment. After a week you should see a better condition.
After each use, it is recommended to follow the treatment with a suitable moisturizer.
warninG: Stop the device, if your skin is irritated or red.
warninG: do not use on skin for longer than 2 to 3 seconds at a time.
4. Turn the device off
5. Rinse the skin with the water or wipe it with wet towel to dispose of the dead skin.
After that it is recommended use of a moisturizer.
str
15
