ViewZ VZ-MV401, Руководство пользователя

Страница: 16 / 32

12
5.2 Rack Mount Installation
Take the following steps to attach the two brackets to the system
chassis and install into rack.
a. Remove all cables and power supply before mount the 4ch Video
Processor in the rack
b. Place the system chassis on a sturdy surface
c. Attach bracket to the left side of the system chassis by using the
screw driver and four screws
d.
Attach the other bracket to the right side of the system chassis by
using the screw driver and four screws
e. Use your tape measure and level to ensure that the supporting
shelf and the chassis are installed straight and level
f. Make sure that your path to the rack is unobstructed.
g. Slide the unit into the rack and position using the attached L
brackets so that the slots in the brackets are positioned over the
appropriate mounting holes in the side rails of the rack
h.
Securely fasten the unit into the rack by using the four screws
which are supplied with the rack mount kit, installing two of the
screws on each side of the unit. Use a screw driver to tighten the
screws on each side of the unit.