ViewZ VZ-7IPTM, Руководство пользователя

Страница: 20 / 113

Page.16.
33 PSE power sourcing equipment. Tests PoE voltage
34 PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)
35 Audio output and earphone interface
36 Audio input
37 USB 5V 2A power output (used only for power, not data)
38 DC12V2A charging interface
39 DC12V2A power output , for provisional DC power supply
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well
connected.
Usually it doesn’t need to disconnect the cable at the normal use
Pressing the key continuously can power on or off the tester.
Notice:Pls use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed
Notice: When the Charge Indicator turns off, the battery is approximately 90%
charged. The charging time can be extended for about 1 hour and the charging time within 12
hours will not damage the battery.
Notice :
Press the key several seconds to restore the default settings when the
instrument works abnormally.