ViewSonic WUSB 100, Руководство пользователя

Страница: 17 / 28

14 ViewSonic Wireless USB Adapter
5
Click the Authentication tab, un-check the Enable IEEE
802.1X for this network (if it is selected). If you can not
select this check box, then you are not using 802.1x
authentication.
My WUSB100 does not work properly after
installation.
•
Make sure that the WUSB100 is correctly installed.
Verify that the WUSB100 is firmly inserted into an available
USB port on your computer.
•
Verify that you are using the correct wireless settings.
You might have incomplete or incorrect wireless settings
for your adapter. To connect successfully, the wireless
adapter on your PC must have the same network name
(SSID) and wireless security (WEP and/or WPA)
information as your router or gateway.
•
Reset your router or gateway. Turn off or unplug your
router or gateway, wait at least 10 seconds, then turn it
back on again. When the status lights indicate that the
router or gateway is functioning, try accessing the Internet
from your PC connected to your wireless network.
•
Look for conflicts among your device resources. Try
using Windows Troubleshooting to verify that the
WUSB100 is not trying to use computer resources already
being used by another piece of hardware.
My network is slow.
•
Try decreasing the number of computers or programs that
are simultaneously accessing your network.
•
Contact your Internet Service Provider (ISP) to verify that
there are no problems with your connection, such as
scheduled maintenance, line issues, or other problems. If
you are still not satisfied with your connection speed, you
might want to inquire about upgrading to a faster
connection.
USB UG.book Page 14 Tuesday, July 13, 2004 5:50 PM