ViewSonic
Wireless Media Gateway
17
LAN
(Primary Setup)
IP Address:
The default is Gateway IP Setting. No change is
necessary.
Subnet Mask:
The default is Gateway IP Setting. No change
is necessary.
Wireless
(Primary Setup)
Mode:
click the down arrow field for the drop-down menu
with a list of wireless networking modes. Select one of the
following modes based on your environment setting:
•
11b+g:
If you have 802.11b and 802.11g devices in your
network, then keep the default setting, 11b+g.
•
11g Only:
Default for optimal performance. If you have
802.11g devices, select
11g Only
. This will give you the
best wireless performance.
Channel:
change as needed (recommended) especially if
you experience interference with other wireless routers in the
vicinity.
SSID:
the default “viewsonic” is automatically entered. No
change is necessary.
Security:
select one.
Disable >
click
Apply > p
ress
Logout
to close the
screen.
Enable
> click
Configure Security
. The
Wireless LAN
Configuration
screen appears as shown on the next
page.
Security Mode
defaults to WEP.
Wireless LAN Configuration
screen shown on the next page.
Содержание Wireless Media Gateway WMG120
Страница 1: ...User Guide Wireless Media Gateway WMG80 WMG120 ...
Страница 68: ...ViewSonic Wireless Media Gateway 62 7 Select a model from the list of Printers Click OK ...
Страница 105: ......