manualshive.com logo in svg

ViewSonic VS11444, Руководство по обслуживанию


Поделиться
Скачать
background image

ViewSonic Corporation

 

Confidential - Do Not Copy 

   

 21

 

4. Circuit Description 

4.1 Switching Mode Power Supply 

4.1.1 AC Current Input Circuit 

P801 is a connector for connecting AC Power. F801 is a fuse to protect all the circuit. AC input 

voltage is from 90v to 264V. R801 and R802 joined between two inputting main circuit to prevent 
man from shock. L801 is used to clear up low frequency wave. C801 and C802 are used to discharge 
the waves that L801 produced. High frequency waves are damped by C801 and C802. D801 is a 
rectifier which composed of 4 build-in diodes, it inverts AC to DC. 

 

4.1.2 High Voltage to Low Voltage Control Circuit 

C804 is used to smooth the wave from rectifier. IC802 is a highly integrated PWM controller. 

When rectified DC high voltage is applied to the HV pin during start-up, the MOSFET Q804 is 
initially off, and the Vcc pin capacitor is charged. When the Vcc pin voltage reaches approximately 
10V, the control circuitry is activated and the soft-start begins. The soft-start circuit gradually 
increases the duty cycle of the MOSFET from zero to the maximum value over approximately 4ms. 
If no external feedback/supply current is fed into the FB pin by the end of the soft-start, the current 
Setpoint will be above the fault level, FAULT flag is raised, if the FAULT duration exceeds 80ms, 
the output controller disable 

Resistor R808, R809, R810, R811 are for line over voltage shutdown(OVP)   

When PWM is turned off, the main current flow will be consumed through R804 and D802, 

This will prevent MOSFET Q804 from being damaged under large current impulse and voltage 
spike. 

D803 and C807 to provide internal Auxiliary voltage to Vcc pin during normal operation. 

Otherwise, error amplifier and feedback current input the FB pin for duty cycle control. 

 

4.1.3  DC_5V and DC_14V Output Circuit 

For DC 5V, D805 is used to rectify the inducted current. R828 and C814 are used to store 

energy when current is reversed. The parts including C818, C822, C820,L803 are used to smooth 
the current waves. 

For DC 14V, D803 is used to rectify the inducted current. R827 and C813 are used to store 

energy when current is reversed. The parts including C815, C817 and L802 are used to smooth the 
current waves. 

 

4.1.4 Feedback and OVP Protect Circuit 

Pin R of IC803 is supplied 2.5-v stable voltage. It connects to 5V and 14V output through 

R822, R823 and R824. R822, R823 and R824 are output sampling resistor. When the sampling 
voltage more than 2.5V or less than 2.5V, current of FB IC802 will change, this can change the 
voltage from T801.   

OVP Protect Circuit: When output is overvoltage, the auxiliary winding voltage will be 

increased, when it reaches about 14V. Q803 is triggered . It makes the IC802 Pin 1 exceed 5V, then 
the IC802 output will be disabled.   

Q801, R816, R817 and ZD803 make up of dummy loading circuit. For start-up sequence, 

during 5V output take place high loading first, this dummy loading circuit operated to insure 14V 

V

X

193

5

wm-

3

 

Содержание VS11444












































































Отзывы:

Нет отзывов

Похожие инструкции для VS11444

D-Link DCS-825L Quick Install Manual preview
DCS-825L
Бренд: D-Link Страницы: 24
Eaton XV-152 Series Operating Instructions Manual preview
XV-152 Series
Бренд: Eaton Страницы: 70
Panasonic TH-80BF1U Operating Instructions Manual preview
TH-80BF1U
Бренд: Panasonic Страницы: 41
I-Inc iP-191ABB User Manual preview
iP-191ABB
Бренд: I-Inc Страницы: 1
LifeSource XC 300 Instruction Manual preview
XC 300
Бренд: LifeSource Страницы: 13
AOC e2237FW2 Service Manual preview
e2237FW2
Бренд: AOC Страницы: 93
Princeton SENergy 914 Reference Manual preview
SENergy 914
Бренд: Princeton Страницы: 22
Hanns.G HL272 User Manual preview
HL272
Бренд: Hanns.G Страницы: 24
I-Tech iNAP-1700 User Manual preview
iNAP-1700
Бренд: I-Tech Страницы: 27
FEC AM-1022 Series User Manual preview
AM-1022 Series
Бренд: FEC Страницы: 22
WAGO e!DISPLAY 7300T Manual preview
e!DISPLAY 7300T
Бренд: WAGO Страницы: 104
Uniden Guardian UBR243 User Manual preview
Guardian UBR243
Бренд: Uniden Страницы: 46
ViewSonic vx912-1 Service Manual preview
vx912-1
Бренд: ViewSonic Страницы: 70
Digimate L-1925 Quick Start Card preview
L-1925
Бренд: Digimate Страницы: 22
Contec GPD-U64EM-DC2 Product Manual preview
GPD-U64EM-DC2
Бренд: Contec Страницы: 2
Dynascan DS491LT4-M User Manual preview
DS491LT4-M
Бренд: Dynascan Страницы: 31
i3-TECHNOLOGIES i3TOUCH EXCELLENCE User Manual preview
i3TOUCH EXCELLENCE
Бренд: i3-TECHNOLOGIES Страницы: 16
Waeco PerfectView M70IP Installation And Operating Manual preview
PerfectView M70IP
Бренд: Waeco Страницы: 280

Бренды по названию

Популярные бренды

Загрузить еще бренды