ViewSonic VS11435, Руководство по обслуживанию

Страница: 10 / 70

3. Execute Auto Image Adjust
Note: Memory Recall should have no effect for Language, Power Lock, User Color Settings or
Input Priority
Resolution Notice Actions
1. Resolution Notice OSD should show on screen after changing to non-native mode for 30
sec
2. The OSD should disappear after 10 sec or by pushing button [1] or [2]
Resolution Notice function should be disabled when push button [2] under Resolution Notice
OSD
0-Touch™ Function Actions
1. Execute Auto Image Adjust when new mode detected, and save the settings to buffer for
further use
2. It should be reset by Memory Recall function
(Should not reset by power off, power unplug and others)
OSD Auto Save
The OSD shall save new settings when it is turned off by the user or when it times out. There
shall not be a separate save
Input Priority
This function is defined the auto detect priority when the display has several inputs. Please
refer to the detail flow chart as the appendix D
4-6 AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input signal 1.0 Vrms @1kHz
Line input impedance 10 kOhm
Maximum Amp power output (Watt)
2 W (RL=
4Ω)
Amp -THD < 10 % THD @1kHz
Speaker Power rating(
Ω/
Watt)
1.5
W (typ.
) ; 2
W (max
)
Signal to Noise Ratio 72 dB
Frequency response 100 – 20kHz
SPL. 85
± 3
dB (at 0.5m)
Line input connection
3.5 mm stereo jacks
Vibration
There should be no audible vibration
resonance at
volume=100% & treble /
bass in def. Value
Screen image
There should be no affect on the screen
image stability under any conditions
Connector PC99 requirement Audio in Lime Green pantone # 577C
Cable type / length 3.5mm stereo cable / 1.8m length
Audio DPMS
Speakers stay off when the rest of the
monitor is in power saving
Note: There is no guarantee <1
W at
power consumption in Active Off mode,
when the Audio Cable is connected
ViewSonic Corporation
Confidential - Do Not Copy
VX2035wm-1
7