Electric Specification
DC Characteristics
Absolute Maximum Ratings
PARAMETER SYMBOL MIN TYP MAX UNITS
Voltage on Input (5V tolerant) VIN -1 5 V
Electrostatic Discharge VESD ±2.5 kV
Latch-Up ILA ±100 mA
Ambient Operating Temperature TA 0 70 oC
Storage temperature (plastic) TSTG -55 125 oC
Thermal Resistance (Junction to Air)
Ө
JA 35.3 oC/W
Table 2 DC Characteristics/Operating Condition
(0'<TA<70'; VDD = 3.3V ± 0.3V)
PARAMETER SYMBOL MIN TYP MAX UNITS
Supply Voltage VDD 3.0 3.3 3.6 V
Output High Voltage VOH 2.4 VDD V
Output Low Voltage VOL GND 0.5 V
Input High Voltage VIH 2.0 V
Input Low Voltage VIL 0.8 V
I/O Pull-up resistance RPU 75K
Ω
I/O Pull-down resistance RPD 75K
Ω
Input Leakage Current(VI=VCC or GND) ILI -10 +10
μ
A
Output Leakage Current(VO=VCC or GND) ILO -20 +20
μ
A
EM6A9320-XXMEtron
4M x 32 DDR SDRAM
Features
Fast clock rate: 300/275/250/200 MHz
Differential Clock CK & CK# input
4 Bi-directional DQS. Data transactions on both edges of DQS (1DQS / Byte)
DLL aligns DQ and DQS transitions
Edge aligned data & DQS output
Center aligned data & DQS input
4 internal banks, 1M x 32-bit for each bank
Programmable mode and extended mode registers
CAS# Latency: 3, 4, 5
Burst length: 2, 4, 8
Burst Type: Sequential & Interleave
Full page burst length for sequential type only
Start address of full page burst should be even
All inputs except DQ’s & DM are at the positive edge of the system clock
No Write-Interrupted by Read function
4 individual DM control for write masking only
Auto Refresh and Self Refresh
4096 refresh cycles / 32ms
Power supplies :
VDD = 2.5V _ 5%
VDDQ = 2.5V _ 5%
Interface : SSTL_2 I/O compatible
Standard 144-ball FBGA package
Overview
The EM6A9320 DDR SDRAM is a high-speed CMOS double data rate synchronous DRAM
containing 128 Mbits. It is internally configured as a quad 1M x 32 DRAM with a synchronous
interface (all signals are registered on the positive edge of the clock signal, CK).Data outputs occur at
both rising edges of CK and CK#.Read and write accesses to the SDRAM are burst oriented; accesses
start at a selected location and continue for a programmed number of locations in a programmed
sequence.Accesses begin with the registration of a BankActivate command, which is then followed by
a Read or Write command.
The EM6A9320 provides programmable Read or Write burst lengths of 2, 4, 8. An auto precharge
function may be enabled to provide a self-timed row precharge that is initiated at the end of the burst
sequence.
ViewSonic Corporation
Confidential – Do Not Copy
VP920-1_VP920b-1
18
Содержание VP920-1
