ViewSonic
VP2365wb
9
Using the LCD Display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The
timing mode
consists of the
resolution
(example 1920 x 1080) and
refresh rate
(or vertical frequency; example 60 Hz). After setting the timing mode, use the
OSD (On-screen Display) controls to adjust the screen image.
For the best picture quality set your LCD display timing mode to:
VESA 1920 x 1080 @ 60Hz
.
To set the Timing Mode:
1. Set the resolution:
Right-click on the Windows desktop > Properties > Settings > set the
resolution.
2. Set the refresh rate:
See your graphic card's user guide for instructions.
WARNING:
Do not set the graphics card in your computer to exceed the maximum refresh
rate of 75Hz; doing so may result in permanent damage to your LCD display.
OSD and Power Lock Settings
•
OSD Lock:
Press and hold [1] and the up arrow
S
for 10 seconds. If any buttons are
pressed the message
OSD Locked
will display for 3 seconds.
•
OSD Unlock:
Press and hold [1] and the up arrow
S
again for 10 seconds.
•
Power Button Lock:
Press and hold [1] and the down arrow
T
for 10 seconds. If the
power button is pressed the message
Power Button Locked
will display for 3 seconds. With
or without this setting, after a power failure, your LCD display’s power will automatically
turn ON when power is restored.
•
Power Button Unlock:
Press and hold [1] and the down arrow
T
again for 10 seconds.
•
Auto Power Off enable:
Press [2] and the up arrow
S
. The display will power off
automatically when no signal is detected for 3 minutes.
•
Auto Power Off disable:
Press [2] and the up arrow
S
again.
Содержание VP2365WB - 23" LCD Monitor
Страница 27: ......
