ViewSonic VP231WB - 23" LCD Monitor, Руководство пользователя

Страница: 8 / 22

Using the LCD Display
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The
timing mode consists of the
resolution refresh rate (or vertical frequency;
example
60
Hz). After setting the timing mode, use the OnView ® controls
to adjust the screen image.
For the best picture quality set your
LCD display timing mode to:
To set the Timing Mode:
1
Set the resolution: Right-click on the Windows desktop > Properties >
Settings > set the resolution.
2
Set the refresh rate: See your graphic card's user guide for instructions.
WARNING:
Do not set the graphics card in your computer to exceed the
maximum refresh rate of
8
5Hz; doing so may result in permanent damage to
your LCD display .
OSD and Power Lock Settings
• OSD Lock: Press and hold [1] and the up arrow
▲
for 10 seconds. If any
buttons are pressed the message OSD Locked will display for 5 seconds.
• OSD Unlock: Press and hold [1] and the up arrow
▲
again for 10 seconds.
• Power Button Lock: Press and hold [1] and the down arrow
▼
for 10
seconds. If the power button is pressed the message
Power Button Locked
will display for 5 seconds. With or without this setting, after a power failure,
your
LCD display ’s power will automatically turn ON when power is
restored.
Power Button Unlock: Press and hold [1] and the down arrow
▼
again for 10
seconds.
(example 1920 x 1
200
) and
VESA 192
0
x 1
200
@ 60Hz.
ViewSonic VP231wb 7