9
Initial Setup
This section provides detailed instructions for setting up your monitor.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole pattern
(W x H)
Interface Pad
(W x H x D)
Pad Hole
Screw Specification &
Quantity
14kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5mm
M4 x 10mm
4 pieces
NTTE
Wall mount kits are sold separately.
1.
Turn off the device and disconnect all cables.
2.
Place the device on a flat, stable surface, with the screen facing down.
3.
Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
100 mm
100 mm
4.
Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
