Auto Adjust
Though your computer system can identify the new LCD monitor system, the Auto Adjust
function can be as to enhance the display. To enter adjust mode, please refer to “OSD
Control”.
Turn the computer and LCD monitor on.
Press ‘Auto’ button to start Auto Adjust.
The LCD monitor will start the Auto Adjust process automatically for 10 consecutive
seconds, where you will notice the image change as the Auto Adjust is working.
Self Test Function
Check (STFC):
Your LCD monitor provides a STFC function, through which you can check whether
the LCD monitor functions are working properly.
If your LCD monitor is properly connected, but there is no image showing and the
indicator light keeps orange, please follow the steps below to start STFC.
Shutdown computer and LCD monitor.
Unplug the signal connector from the back of computer.
Turn the LCD monitor on.
If the image connector is disconnected or damaged, the image shown on following
figure will also appear during normal operation.
Turn off the LCD monitor and reconnect signal cable, and then turn the
computer and LCD monitor on.
If the LED of the LCD monitor is an orange color after completing the steps above,
please check your VGA card and computer system. Your monitor should be
operating properly.
3. Front Panel Function Control Description
9
ViewSonic
Corporation
Co
nfidential
-
Do
Not
Copy
VE902m
Содержание VE902m
Страница 25: ...Figure 5 Figure 8 Figure 7 Figure 6 Figure 5 22 ViewSonic Corporation Confidential Do Not Copy VE902m ...
Страница 30: ...1 10 Select gm5126AA_AB Select gm5126AA_AB 27 ViewSonic Corporation Confidential Do Not Copy VE902m ...
Страница 54: ...8 Exploded Diagram And Spare Parts List 51 ViewSonic Corporation Confidential Do Not Copy VE902m ...
Страница 67: ...64 ViewSonic Corporation Confidential Do Not Copy VE902m 11 PCB Layout Diagrams Main board ...