C.
Set CA
2
10 color anal
y
zer at the center of screen
.
D.
Move “
▼
” key to select the “ WHITE BALANCE” item in the factory mode and
press “ 2 “key, then the white balance will be auto adjusted.
E.
Color temperature verification: (Set Brightness and Contrast to Maximum)
(1)
6500K verify : press “
▼
” ,“
▲
” key to move cursor to 6500K at
factory mode and press “ 2 “ key, and then check the color temperature is
x=0.310
±
0.03
y=0.330
±
0.03
Y
≧
200 cd/m
2
(2)
9300K verify : press “
▼
” ,“
▲
” key to move cursor to 9300K at
factory mode and press “ 2 “ key, and then check the color temperature is
x=0.283
±
0.03
y=0.298
±
0.03
4.
Geometry:
A.
Pattern : Cross hatch
B.
Change each mode on the timing table in turns and ex
e
cute the “Auto Adjust
“ function on the OSD menu , then all the data of each mode will be auto saved
.
C.
Until all of modes are a
d
justed, press “ 1 “ to exit OSD menu and switch power off
to exit factory mode.
!
!
ViewSonic Corporation
14
Confidential
– Do Not Copy
VE155s
, VE500-2
VE
15
5
/b, VA520-2
